How To Fix System Thread Exception Not Handled Error in Windows 10

Total
0
Shares

All the Windows OS users do face annoying errors and issues, and BSOD- the Blue Screen of Death is one of them. So if you are sick of the Blue Screen of Death and face it very often, then you can fix it with the given methods. The system thread exception not handled error is one of the common errors faced by the users while working on the computers and it appears whenever something erroneous happens. If BSOD appears, it means that your computer is frozen at the BSOD and requires a restart. But when BSOD appears with system thread exception not handled error than powering the system off and then restarting it won’t happen. And so there are a lot of methods by which you can solve this issue like through stop code system thread exception not handled.

If you are a gamer and receiving this error then chances are the issue occurs due to graphics card driver error. Make sure that all the drivers are updated. After Windows start and stuck in the unlimited reboot of SYSTEM THREAD EXCEPTION NOT HANDLED blue screen error. This blue screen error is mainly due to outdated, incompatible or properly configured drivers.

Fix system thread exception not handled Error

Windows 10 system thread exception not handled problem can be fixed by knowing the Driver that is causing trouble and then carrying out the given below solutions. Firstly install the application WhoCrashed for free and then run the utility so as to discover the driver causing the system_thread_exception_not_handled windows 8 error. You will get the output of this utility in the form of coding. You just need to follow the file path and find out the troublesome driver.

Solution I- Enter the Safe Mode and Uninstall Graphics Card Driver

The System Thread Exception Not Handled Error Windows 10 is the error that occurs frequently. When you get the error message of system thread exception not handled, the system starts to reboot itself after 5 to 10 seconds. Then to fix the error of system thread exception not handled windows 10 install the latest graphic card and discard the outdated one. Follow the given steps and fix your computer’s error of system thread exception not handled Windows 10 or 8.

Step 1- To start the process, firstly insert a boot disk of Windows 8 or 8.1 or 10 according to your system into your CD/DVD drive.

Steps 2- Now reboot your Windows 8.1 or 10 devices for system thread exception not handled windows 8.1 fix or 10.

Step 3- Now as your computer will restart. It will automatically go to the bootable disk page.

Step 4- It might happen that you have to choose whether you want to boot from the specific media of Windows 8 or 10. And so you will have to do so.

Step 5- Now you will have the Windows setup screen in front of you.

Step 6- Select or left click on the “Next” option present in the lower side of our screen.

Step 7- After pressing “Next”, select on left clicks on the “Repair your Computer” option that will again flash at the lower side of your computer screen.

Step 8- A window called “choose tour Option” will open. Select or left click on the “Troubleshoot” feature in this window.

Step 9- Now another window will open up. Here select the “Advanced options” feature.

Step 10- After that you need to left click on the “Command Prompt” feature.

Step 11- When the black colored Command Prompt window will open, enter “C:” and press Enter.

 

Command Prompt

Step12- Now in the Command Window, write the following command- “BCDEDIT /SET {DEFAUT} BOOTMENUPOLIC LEGACY” AND PRESS Enter so that the legacy advanced boot menu is enabled.

Step 13- After the successful execution of the previous command, type “Exit” so as to close the Command Window.

Step 14- Now select or left click on the “continue” option from the “Choose an Option” Window.

Step 15- Next, reboot your Windows 8 or 8.1 or 10 device.

Step 16- As your device restarts after reboot, press the F8 button on the keyboard constantly till you get the menu of “Advanced boot options.”

Step 17- After the “advanced boot options” window open, you need to use the arrows of the keyboard rather than the mouse and move to the “Safe Mode” option and select it.

 

Safe Mode

Step 18- Now press “Enter.”

Step 19- So now your computer with Windows 8 or 8.1 or 10 will start and so the first thing that you need to do is log in with the administrator’s account.

Step 20- Now select or left click on the “Desktop” icon present on the Start screen.

Step 21- Now move your cursor and select or click on the “Settings” option.

Step 22- After the Settings menu is opened click on the “Control Panel” option.

Step 23- Now in the Control Panel, left click on the “Device Manager”, and then double click on the “Display Adapters” option present on the left side so as to expand it.

Step 24- The graphics driver will be appear that your Windows 8 or 10 is currently using and the next step is to right click on it.

Step 25- Now to uninstall it, left click on the “Uninstall” option.

 

Uninstall

Step 26- In the next new window that appears, click on the ok button to confirm and continue the process of uninstallation.

Step 27- After the uninstallation process is completed you need to remove the boot media of Windows 8 or 10 and restart the Operating system.

Step 28- Check if the drivers are installed automatically or you can even install the latest driver and reboot your system.

Solution II- Change in the Power Settings

In order to boot the system successfully, if the above given method of reaching the Safe Mode for you system thread exception not handled Windows 10 error doesn’t help, then you can follow the given steps:

Step 1- Turn off the device and remove the battery and unplug the power source.

Step 2- Leave it off for a few minutes and then just hold the power button down for 15-20 seconds.

Step 3- Now plug in the power but do not put on the battery back, and then turn on your laptop.

Step 4-The laptop would start normally and then you can insert the battery at your convenience but at the earliest.

Step 5- Once your device reboots, you can change your driver causing trouble by rebooting again.

Solution III- Check in Compatibility Mode

If the error says system thread exception not handled overclock, then you need to check the compatibility mode. Either download the drivers from the website of the manufacturer for Windows 10 and if it is not available for Windows 10 then download the most recent drivers and install it in compatibility mode. This will run your system from the last version of Windows. Follow the steps for stop code system thread exception not handled:

Step 1- From the website, download the drivers.

Step 2- Click on properties option after you right click on the setup file of the driver.

Step 3- Select the “Compatibility” option and the click the check box in front of “Run this program in Compatibility mode for” and the choose Windows 8 OS to continue with the installation.

Step 4- Now restart the system.

Also Read :

Solution IV- Disable Hardware Acceleration in Chrome

One can try disabling the hardware acceleration in your Chrome browser or flash when the system thread exception not handled error pops up frequently. And so in cases when the system thread exception not handled windows 10 installation of latest graphics driver fails, one can follow the given below steps and fix it.

The steps to fix the error of system thread exception not handled windows 10 is different for the various browsers.

Disable Hardware Acceleration in Chrome

Step 1- Enter “chrome://flags” in the address bar after opening Chrome.

Step 2- Go to the “GPU composting on all pages” by scrolling down.

Step 3- Change the option from “Default” to “Disabled” from the dropdown list.

Step 4- Select Relaunch and Chrome will then close and restart.

 

Disable Hardware Acceleration in Chrome

Disable Hardware Acceleration in Mozilla Firefox

Step 1- In the address bar, enter about:preferences#advanced, after opening Mozilla Firefox.

Step 2- Now uncheck the option- “Use hardware acceleration when available.”

Step 3- Close the program and restart Firefox.

 

Disable Hardware Acceleration in Mozilla Firefox

Disable Hardware Acceleration in Internet Explorer

Step 1- Internet Explorer> Tool> Internet Options

Step 2- Select Advanced> Accelerated Graphics.

Step 3- Now click on the check box in front of “Use software rendering instead of GPU rendering.”

Step 4- Clock on OK and restart the program.

 

Disable Hardware Acceleration in Internet Explorer

Disable Hardware Acceleration in Adobe Flash Player

Step 1- Visit the Adobe Flash Help Page and navigate to the step 5.

Step 2- An animated tree embedded object would be visible. Right click on the animated object and select Settings

Step 3- Uncheck the box of “Enable Hardware Acceleration in the Settings window of Adobe Flash Player that would open.

Step 4- Close the program and restart the browser.

 

Disable Hardware Acceleration in Adobe Flash Player

We have tried to give you a complete detail of how you can fix the error of system thread exception not handled. This step by step guide would definitely help you in issues due to drivers or video failures flashing error like system thread exception not handled nvlddmkm.sys windows 10. We hope that all the Windows 10 users will not come across the windows 10 system thread exception not handled error, after they try out these solutions.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like